Hollow Cone Nozzle

Despite the conical hollow spray, the pattern becomes closer to the full area spray as the spray distance is further. When set at seven pore model, a circular full area spray of 1 to 2 metres in diameter is obtained. In the pressure range of 3 to 30kg/cm2 water droplets become fine and a very soft spray is obtained. Therefore, when applied in the cooling of steel materials, water droplets are readily evaporated and a great effect is expected of a small water volume. Also, effective in gas cooling, gas cleaning, dust collecting and steel and chemical industries. Depending on space of installation, there are one pore type, three pore type and seven pore type.

Hollow Cone Atomizing Nozzle

Hollow cone atomizing nozzles are for obtaining a fine mist. Used widely in oil burners, humidifying, disinfecting, sterilising, oil coating. The cemented carbide type is particularly excellent in wear resistance at high pressure and is suited for airless painting and oil coating. The spray angle is 45°, 60° and 80° at pressure of 10kg/cm2. Composed of body, nozzle tip (integral with body if made with stainless steel or brass), spiral core and setscrew. Strainer, wire net and adapter are furnished as specified.